Printing from Linux


MyPrint Devices

The University 'MyPrint' system is a centrally managed pull printing system.

This allows print jobs to be sent to a single queue, and then collected from one of many printers by logging in to the printer, and selecting the jobs to be printed.

On the Linux systems, there are two 'MyPrint' queueus:

  • myprint - for taught student use
  • myprint-staff - for staff and research postgraduate use

For taught students, printing to the myprint queue, a prompt should appear when a job is sent to print - this will tell you how much you will be charged for the print job, and allow you to confirm or cancel.

For staff and research postgraduates, sending to the myprint-staff queue will allow the job to be collected from a 'MyPrint' enabled device.

The default for all print queues is to use duplex printing.

Printing From The Command Line

Printing from the command line can be done with the lp command.

For example, to print the file myFile.pdf to printer, in colour, you can use:

lp -d myprint-staff myFile.pdf

From a command line, duplexing can be switched off using the lp command, and the Konica driver option 'KMDuplex', e.g.:

lp -o KMDuplex=1Sided -d myprint-staff /path/to/file

This would print the file single sided

All available print queues can be listed with the command:

lpstat -a

Konica Driver Options

The Konica drivers have a multitude of options available, some which are likely to be useful can be found, when printing from graphical programs, under the following headings:

  • Binding Position - for duplex printing, default is 'left bind'.
  • Print Type - duplex option, default is '2-sided'.
  • Select Color - switch colour on ('Auto Colour') or off, default is 'Gray Scale'.
  • Staple - staple together the output, default is 'off' (stapling requires a finishing unit - see Printer Locations).

Here is an example of setting some driver options within a pdf viewer:
Printing from Linux - PDF Viewer

Printing from Firefox

Be aware! when using firefox, the paper size setting is not within the print settings...
You can set the paper size within the 'File' > 'Page Setup' options.:

Printing from Linux - Firefox

Printing from LibreOffice

Some files in LibreOffice (usually documents that have been saved in a Microsoft '.doc'/'.docx' format) may not print if the document paper size is set to 'letter', as this can override any settings in the print preferences.

To get around this the document page size must be changed to A4, within the 'Format' > 'Page' menu:

Printing from Linux - <span class=OpenOffice" src="https://www.environment.leeds.ac.uk/wiki/pub/IT/WebHome/Printing-Linux-OpenOffice.png" />

Setting the 'Format' option to A4 should allow the document to print successfully.

A5 Booklet Printing (.pdf):

The Konica Multi Function devices have settings in the driver to enable booklet printing, however, these may not always work as expected.

The easiest way to print out an A5 booklet, is to print from a .pdf file using acroread.

acroread should be in the PATH by default, and can be opened from a terminal by simply typing:

acroread

When printing, select the required printer from the list, and within the 'page handling' section of the print dialogue, set 'Page Scaling' to 'Booklet Printing', set 'Booklet Subset' to 'Both Sides', and leave the 'Auto-Rotate Pages' box un-checked:

Printing from Linux - Booklet Printing

To ensure the pages are all facing the correct way, the 'Binding Position' option needs to be set to 'Top Bind' within the driver settings.

This can be done by going to the printer properties, by clicking the 'properties' button, at the top right of the print dialogue box, where the 'Bind Position' option can be found, and set to 'Top Bind':

Printing from Linux - Booklet Printing

Linux - Tux

Edit | Attach | Print version | History: r9 < r8 < r7 < r6 < r5 | Backlinks | Raw View | Raw edit | More topic actions...
Topic revision: r7 - 29 Oct 2017 - earrr
 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright 2008-2014 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.