Difference: PosterPrint (1 vs. 9)

Revision 908 Jan 2019 - RichardBettie1

Line: 1 to 1
 
META TOPICPARENT name="EnvPoster"
<--===== START PAGE =====================================-->
<--===== START HEADER ====================================-->

<--===== START PAGE =====================================-->

<--===== BANNER IMAGE ===================================-->

Faculty Poster Plotting

<--===== CONTENT: =======================================-->

<--===== END HEADER ====================================-->
Line: 9 to 9
 
<--===== PAGE TEXT ======================================-->

Centrally available service

Changed:
<
<
A poster plotting service is available from the Print and Copy Bureau in the Roger Stevens Building.
>
>
A poster plotting service is available from the Print and Copy Bureau in the Roger Stevens Building.
 The Print and Copy Bureau services are provided by the University for the University on a non-profit basis. We encourage everyone to use that service for high-quality poster plotting.
Deleted:
<
<

How to have a poster printed on the Faculty Plotter

The Faculty of Environment also provides a basic poster plotting service at cost price. We have identified demand in 2 areas which this service is aimed at -

  • Last minute printing - sometimes we are able to print posters on the day of asking - usually there's a few days wait for the Print and Copy Bureau.
  • Lower-quality printing at cost - we charge cost price on the relatively low-quality poster device we run in the Faculty - this is substantially cheaper than the Print and Copy bureau.
The poster plotting service run by the Faculty is not capable of supporting large print runs, or meeting tight deadlines - there are no dedicated staff - only the Faculty IT team fitting this service into other schedules. We cannot accept more than 4 poster bookings per day.

The Faculty plotter is suitable for making posters up to A0 in size. The service is available to Faculty of Environment staff, research students and undergraduates.

If you want to use the plotter, please read the notes below, book a time slot, and ContactingITSupport attaching the document. You are not able to send print jobs yourself - you have to create a booking and send it to IT staff to be printed.

Plotter

The plotter is an HP DesignJet 500 Plus colour plotter.

Paper size: Paper is on a roll, 36" wide and 150' long. Normally plots are A0 (33.1" x 46.8" or 841mm x 1189mm) but custom sizes can be specified. It is best (but not essential) that your document is created at the size you want it printing. We normally stock both standard heavy-coated paper and high-gloss photo paper. Single sheets can also be fed to the printer - various types of paper are possible, including transparencies. This paper would have to be ordered as the need arose.

<--

Charging

* * 10 per print for standard heavyweight paper

* * 20 per print for glossy heavyweight photo paper

This covers both the paper and ink used. If a print fails for any reason the charge is not refundable but we will usually advise on fixing the document and attempt to reprint.

Smaller sizes are no cheaper, but a higher rate may have to be negotiated for plots longer than A0 size.

There are a few options to pay for personal prints: * Research grant code * Pay online at the University of Leeds Store.

Please send the code or reciept with the file to be printed.

-->

Booking the plotter

We can only print 4 posters per day. It is possible to book one of these 4 slots at the poster booking site. (Select the Poster Plotting area, then click on the day you want to plot the poster, then click on one of the available poster slots). You can also book by sending a request to foe-support@leeds.ac.uk. Posters which haven't been booked are plotted on a first-come, first-served basis - it's unlikely that we'll be able to plot non-booked posters if all the booking slots are taken on a particular day. We do not stock spare paper or inks for the plotter, so when either of these runs out there will be a delay of a couple of days before new stocks arrive.

At times when there is a student deadline for poster submission, demand for poster plots often exceeds the maximum 4 posters per day which we can plot - so booking is recommended.

Transferring data

Plots can be made direct from any network drive. If you prefer, you can bring a CD or a USB flash disk to the Faculty IT Office in Staff Centre 9.20 where it can be read and returned at once. Or email the file to foe-support@leeds.ac.uk.

Data formats

The plot must be in a format that the software on the Windows research server can load. Currently, that means:

.pdf

.ppt (PowerPoint )

.cdr (CorelDraw version X4 or lower)

!CorelDraw can import postscript, eps and various other formats.

.jpg or .jpeg

In several cases CorelDraw files have failed to print, and this has been resolved by using the "Publish to pdf" function, first making sure that the poster has the page size set to the required size.

Checking your work

It pays to check the poster very carefully BEFORE starting to plot. Make sure there are no unusual fonts or symbols used - they will probably be substituted during plotting, which may spoil the appearance or layout of the text. PowerPoint posters using "transparent windows" may fail to print. Always do a test print of your own to an A4 printer.

It is best if you are present at the start of the printing - issues often arise at this stage.

During plotting

Once the plot is sent it takes around 40 minutes to complete. The finished plot can be collected from the IT office

Notes

Paper roll width is 36 or 914.4 mm A0 is most common - 33.1 x 46.8 or 841 x 1189 mm

We cannot: * trim anything wider than A0 size * laminate any poster

 
<--===== END CONTENT: ===================================-->

<--===== START FOOTER ====================================-->

<--===== WEB LINKS ========================================-->

Useful Links

<--===== START PAGE =====================================-->

<--===== BANNER IMAGE =========================================-->

<--===== CONTENT: =========-->

<--===== PAGE TITLE ============================================-->

<--===== PAGE TEXT ============================================-->

<--===== END CONTENT: =========-->

<--===== END PAGE ============================================-->

<--===== END PAGE =======================================-->

<--===== END FOOTER ====================================-->

Revision 825 Oct 2016 - earrr

Line: 1 to 1
 
META TOPICPARENT name="EnvPoster"
<--===== START PAGE =====================================-->
<--===== START HEADER ====================================-->

<--===== START PAGE =====================================-->

<--===== BANNER IMAGE ===================================-->

Faculty Poster Plotting

<--===== CONTENT: =======================================-->

<--===== END HEADER ====================================-->
Line: 39 to 39
 We normally stock both standard heavy-coated paper and high-gloss photo paper. Single sheets can also be fed to the printer - various types of paper are possible, including transparencies. This paper would have to be ordered as the need arose.
Added:
>
>
 

Booking the plotter

We can only print 4 posters per day.

Revision 722 Oct 2015 - issdjan

Line: 1 to 1
 
META TOPICPARENT name="EnvPoster"
<--===== START PAGE =====================================-->
<--===== START HEADER ====================================-->

<--===== START PAGE =====================================-->

<--===== BANNER IMAGE ===================================-->

Faculty Poster Plotting

<--===== CONTENT: =======================================-->

<--===== END HEADER ====================================-->
Line: 62 to 62
 (Select the Poster Plotting area, then click on the day you want to plot the poster, then click on one of the available poster slots). You can also book by sending a request to foe-support@leeds.ac.uk. Posters which haven't been booked are plotted on a first-come, first-served basis - it's unlikely that we'll be able to plot non-booked posters if all the booking slots are taken on a particular day. We do not stock spare paper or inks for the plotter, so when either of these runs out there will be a delay of a couple of days before new stocks arrive.

At times when there is a student deadline for poster submission, demand for poster plots often exceeds the maximum 4 posters per day which we can plot - so booking is recommended.

Transferring data

Changed:
<
<
Plots can be made direct from any network drive. If you prefer, you can bring a CD or a USB flash disk to the Faculty IT Office in SEE (9.145), where it can be read and returned at once. Or email the file to foe-support@leeds.ac.uk.
>
>
Plots can be made direct from any network drive. If you prefer, you can bring a CD or a USB flash disk to the Faculty IT Office in Staff Centre 9.20 where it can be read and returned at once. Or email the file to foe-support@leeds.ac.uk.
 

Data formats

The plot must be in a format that the software on the Windows research server can load. Currently, that means:

.pdf

.ppt (PowerPoint )

.cdr (CorelDraw version X4 or lower)

!CorelDraw can import postscript, eps and various other formats.

.jpg or .jpeg

In several cases CorelDraw files have failed to print, and this has been resolved by using the "Publish to pdf" function, first making sure that the poster has the page size set to the required size.

Revision 608 May 2015 - issdjan

Line: 1 to 1
 
META TOPICPARENT name="EnvPoster"
<--===== START PAGE =====================================-->
<--===== START HEADER ====================================-->

<--===== START PAGE =====================================-->

<--===== BANNER IMAGE ===================================-->

Faculty Poster Plotting

<--===== CONTENT: =======================================-->

<--===== END HEADER ====================================-->

Revision 529 Apr 2015 - busamra

Line: 1 to 1
 
META TOPICPARENT name="EnvPoster"
<--===== START PAGE =====================================-->
Deleted:
<
<
 
<--===== START HEADER ====================================-->

<--===== START PAGE =====================================-->

<--===== BANNER IMAGE ===================================-->

Faculty Poster Plotting

<--===== CONTENT: =======================================-->

<--===== END HEADER ====================================-->
Deleted:
<
<
 
<--===== PAGE TITLE ======================================-->
Deleted:
<
<
 
<-- 
  • Set THISPAGETITLE = Faculty Poster Plotting
-->
Line: 9 to 6
 
<-- 
  • Set THISPAGETITLE = Faculty Poster Plotting
-->
Deleted:
<
<
 
<--===== PAGE TEXT ======================================-->
Deleted:
<
<

How to have a poster printed on the Faculty Plotter

 
Changed:
<
<
A poster plotting service is available from the Print and Copy Bureau in the Roger Stevens Building. The Print and Copy Bureau services are provided by the University for the University on a non-profit basis. We encourage everyone to use that service for high-quality poster plotting.
>
>

Centrally available service

A poster plotting service is available from the Print and Copy Bureau in the Roger Stevens Building. The Print and Copy Bureau services are provided by the University for the University on a non-profit basis. We encourage everyone to use that service for high-quality poster plotting.

How to have a poster printed on the Faculty Plotter

 
Changed:
<
<
The Faculty of Environment also provides a basic poster plotting service at cost price. We've identified demand in 2 areas which this service is aimed at -
>
>
The Faculty of Environment also provides a basic poster plotting service at cost price. We have identified demand in 2 areas which this service is aimed at -
 
  • Last minute printing - sometimes we are able to print posters on the day of asking - usually there's a few days wait for the Print and Copy Bureau.
  • Lower-quality printing at cost - we charge cost price on the relatively low-quality poster device we run in the Faculty - this is substantially cheaper than the Print and Copy bureau.
Changed:
<
<
The poster plotting service run by the Faculty isn't capable of supporting large print runs, or meeting tight deadlines - there are no dedicated staff - only the Faculty IT team fitting this service into other schedules. Normally we can't accept more than 4 poster plots per day.
>
>
The poster plotting service run by the Faculty is not capable of supporting large print runs, or meeting tight deadlines - there are no dedicated staff - only the Faculty IT team fitting this service into other schedules. We cannot accept more than 4 poster bookings per day.

The Faculty plotter is suitable for making posters up to A0 in size. The service is available to Faculty of Environment staff, research students and undergraduates.

If you want to use the plotter, please read the notes below, book a time slot, and ContactingITSupport attaching the document. You are not able to send print jobs yourself - you have to create a booking and send it to IT staff to be printed.

 
Deleted:
<
<
The Faculty plotter is suitable for making posters up to A0 in size. The service is available to Faculty of Environment staff, research students and undergraduates.

If you want to use the plotter, read the notes below, then contact foe-support@leeds.ac.uk. You can't send print jobs yourself - you have to create a request to have it carried out by IT staff.
 

Plotter

Changed:
<
<
The plotter is an HP DesignJet 500 Plus colour plotter.

Paper size:
Paper is on a roll, 36" wide and 150' long. Normally plots are A0 (841mmx1189mm) but custom sizes can be specified. It is best (but not essential) that your document is sized to A0 when you create it. The Faculty normally stocks both standard heavy-coated paper and high-gloss photo paper.

Single sheets can also be fed to the printer - various types of paper are possible, including transparencies. This paper would have to be ordered as the need arose.
>
>
The plotter is an HP DesignJet 500 Plus colour plotter.

Paper size: Paper is on a roll, 36" wide and 150' long. Normally plots are A0 (33.1" x 46.8" or 841mm x 1189mm) but custom sizes can be specified. It is best (but not essential) that your document is created at the size you want it printing. We normally stock both standard heavy-coated paper and high-gloss photo paper. Single sheets can also be fed to the printer - various types of paper are possible, including transparencies. This paper would have to be ordered as the need arose.

 

Charging

Changed:
<
<
There is a flat rate of 10 pounds per plot when using standard heavyweight paper. For photo paper the rate is 20 pounds. This covers the paper and ink used. If a plot fails for any reason the charge is not refundable. Smaller sizes are not cheaper, but a higher rate would have to be negotiated for plots longer than 1189mm.

You can pay cash (take money to the Faculty Finance Office and bring the receipt to IT Support in SEE 9.145), quote a grant number, or pay online at the University of Leeds Store. Plots will not be started until a receipt for payment or grant code is received.
>
>
* * 10 per print for standard heavyweight paper

* * 20 per print for glossy heavyweight photo paper

This covers both the paper and ink used. If a print fails for any reason the charge is not refundable but we will usually advise on fixing the document and attempt to reprint.

Smaller sizes are no cheaper, but a higher rate may have to be negotiated for plots longer than A0 size.

There are a few options to pay for personal prints: * Research grant code * Pay online at the University of Leeds Store.

Please send the code or reciept with the file to be printed.

 

Booking the plotter

Changed:
<
<
Normally we can only plot 4 posters per day. It's possible to book one of these 4 slots at the poster booking site. (Select the Poster Plotting area, then click on the day you want to plot the poster, then click on one of the available poster slots). You can also book by sending a request to foe-support@leeds.ac.uk. Posters which haven't been booked are plotted on a first-come, first-served basis - it's unlikely that we'll be able to plot non-booked posters if all the booking slots are taken on a particular day. We do not stock spare paper or inks for the plotter, so when either of these runs out there will be a delay of a couple of days before new stocks arrive.

At times when there is a student deadline for poster submission, demand for poster plots often exceeds the maximum 4 posters per day which we can plot - so booking is recommended.
>
>
We can only print 4 posters per day. It is possible to book one of these 4 slots at the poster booking site. (Select the Poster Plotting area, then click on the day you want to plot the poster, then click on one of the available poster slots). You can also book by sending a request to foe-support@leeds.ac.uk. Posters which haven't been booked are plotted on a first-come, first-served basis - it's unlikely that we'll be able to plot non-booked posters if all the booking slots are taken on a particular day. We do not stock spare paper or inks for the plotter, so when either of these runs out there will be a delay of a couple of days before new stocks arrive.

At times when there is a student deadline for poster submission, demand for poster plots often exceeds the maximum 4 posters per day which we can plot - so booking is recommended.
 

Transferring data

Plots can be made direct from any network drive. If you prefer, you can bring a CD or a USB flash disk to the Faculty IT Office in SEE (9.145), where it can be read and returned at once. Or email the file to foe-support@leeds.ac.uk.

Line: 39 to 69
 

Checking your work

It pays to check the poster very carefully BEFORE starting to plot. Make sure there are no unusual fonts or symbols used - they will probably be substituted during plotting, which may spoil the appearance or layout of the text. PowerPoint posters using "transparent windows" may fail to print. Always do a test print of your own to an A4 printer.

It is best if you are present at the start of the printing - issues often arise at this stage.

Added:
>
>
 

During plotting

Changed:
<
<
Once the plot is sent it takes around 30 minutes to complete. The finished plot can be collected from SEE room 9.145.
>
>
Once the plot is sent it takes around 40 minutes to complete. The finished plot can be collected from the IT office

Notes

Paper roll width is 36 or 914.4 mm A0 is most common - 33.1 x 46.8 or 841 x 1189 mm

We cannot: * trim anything wider than A0 size * laminate any poster

 
<--===== END CONTENT: ===================================-->

Revision 403 Nov 2014 - issdjan

Line: 1 to 1
 
META TOPICPARENT name="EnvPoster"
<--===== START PAGE =====================================-->
Line: 35 to 35
 Plots can be made direct from any network drive. If you prefer, you can bring a CD or a USB flash disk to the Faculty IT Office in SEE (9.145), where it can be read and returned at once. Or email the file to foe-support@leeds.ac.uk.

Data formats

Changed:
<
<
The plot must be in a format that the software on the Windows research server can load. Currently, that means:

.pdf

.ppt (PowerPoint )

.cdr (CorelDraw version X4 or lower)

CorelDraw can import postscript, eps and various other formats.

.jpg or .jpeg

In several cases CorelDraw files have failed to print, and this has been resolved by using the "Publish to pdf" function, first making sure that the poster has the page size set to the required size.
>
>
The plot must be in a format that the software on the Windows research server can load. Currently, that means:

.pdf

.ppt (PowerPoint )

.cdr (CorelDraw version X4 or lower)

!CorelDraw can import postscript, eps and various other formats.

.jpg or .jpeg

In several cases CorelDraw files have failed to print, and this has been resolved by using the "Publish to pdf" function, first making sure that the poster has the page size set to the required size.
 

Checking your work

It pays to check the poster very carefully BEFORE starting to plot. Make sure there are no unusual fonts or symbols used - they will probably be substituted during plotting, which may spoil the appearance or layout of the text. PowerPoint posters using "transparent windows" may fail to print. Always do a test print of your own to an A4 printer.

It is best if you are present at the start of the printing - issues often arise at this stage.

Revision 301 Oct 2014 - StuartBorthwick1

Line: 1 to 1
 
META TOPICPARENT name="EnvPoster"
<--===== START PAGE =====================================-->
Line: 13 to 13
 
<--===== PAGE TEXT ======================================-->

How to have a poster printed on the Faculty Plotter

Changed:
<
<
A poster plotting service is available from the Print and Copy Bureau in the Roger Stevens Building. The Print and Copy Bureau services are provided by the University for the University on a non-profit basis. We encourage everyone to use that service for high-quality poster plotting.
>
>
A poster plotting service is available from the Print and Copy Bureau in the Roger Stevens Building. The Print and Copy Bureau services are provided by the University for the University on a non-profit basis. We encourage everyone to use that service for high-quality poster plotting.
  The Faculty of Environment also provides a basic poster plotting service at cost price. We've identified demand in 2 areas which this service is aimed at -
  • Last minute printing - sometimes we are able to print posters on the day of asking - usually there's a few days wait for the Print and Copy Bureau.

Revision 214 Aug 2014 - issdjan

Line: 1 to 1
 
META TOPICPARENT name="EnvPoster"
Changed:
<
<

Poster Plotting

>
>
<--===== START PAGE =====================================-->
 
Changed:
<
<
<-- End of Page Headline element -->
<-- CONTENT ELEMENT, uid:335/text [begin] -->
<-- Text: [begin] -->
>
>
<--===== START HEADER ====================================-->

<--===== START PAGE =====================================-->

<--===== BANNER IMAGE ===================================-->

Faculty Poster Plotting

<--===== CONTENT: =======================================-->

<--===== END HEADER ====================================-->

<--===== PAGE TITLE ======================================-->

<-- 
  • Set THISPAGETITLE = Faculty Poster Plotting
-->

<--===== PAGE TEXT ======================================-->

How to have a poster printed on the Faculty Plotter

  A poster plotting service is available from the Print and Copy Bureau in the Roger Stevens Building. The Print and Copy Bureau services are provided by the University for the University on a non-profit basis. We encourage everyone to use that service for high-quality poster plotting.
Line: 36 to 42
 

During plotting

Once the plot is sent it takes around 30 minutes to complete. The finished plot can be collected from SEE room 9.145.

Changed:
<
<
>
>
<--===== END CONTENT: ===================================-->

<--===== START FOOTER ====================================-->

<--===== WEB LINKS ========================================-->

Useful Links

<--===== START PAGE =====================================-->

<--===== BANNER IMAGE =========================================-->

<--===== CONTENT: =========-->

<--===== PAGE TITLE ============================================-->

<--===== PAGE TEXT ============================================-->

<--===== END CONTENT: =========-->

<--===== END PAGE ============================================-->

<--===== END PAGE =======================================-->

<--===== END FOOTER ====================================-->

<--===== END PAGE =======================================-->

Revision 105 Jun 2014 - issdjan

Line: 1 to 1
Added:
>
>
META TOPICPARENT name="EnvPoster"

Poster Plotting

<-- End of Page Headline element -->
<-- CONTENT ELEMENT, uid:335/text [begin] -->
<-- Text: [begin] -->

A poster plotting service is available from the Print and Copy Bureau in the Roger Stevens Building. The Print and Copy Bureau services are provided by the University for the University on a non-profit basis. We encourage everyone to use that service for high-quality poster plotting.

The Faculty of Environment also provides a basic poster plotting service at cost price. We've identified demand in 2 areas which this service is aimed at -

  • Last minute printing - sometimes we are able to print posters on the day of asking - usually there's a few days wait for the Print and Copy Bureau.
  • Lower-quality printing at cost - we charge cost price on the relatively low-quality poster device we run in the Faculty - this is substantially cheaper than the Print and Copy bureau.
The poster plotting service run by the Faculty isn't capable of supporting large print runs, or meeting tight deadlines - there are no dedicated staff - only the Faculty IT team fitting this service into other schedules. Normally we can't accept more than 4 poster plots per day.

The Faculty plotter is suitable for making posters up to A0 in size. The service is available to Faculty of Environment staff, research students and undergraduates.

If you want to use the plotter, read the notes below, then contact foe-support@leeds.ac.uk. You can't send print jobs yourself - you have to create a request to have it carried out by IT staff.

Plotter

The plotter is an HP DesignJet 500 Plus colour plotter.

Paper size:
Paper is on a roll, 36" wide and 150' long. Normally plots are A0 (841mmx1189mm) but custom sizes can be specified. It is best (but not essential) that your document is sized to A0 when you create it. The Faculty normally stocks both standard heavy-coated paper and high-gloss photo paper.

Single sheets can also be fed to the printer - various types of paper are possible, including transparencies. This paper would have to be ordered as the need arose.

Charging

There is a flat rate of 10 pounds per plot when using standard heavyweight paper. For photo paper the rate is 20 pounds. This covers the paper and ink used. If a plot fails for any reason the charge is not refundable. Smaller sizes are not cheaper, but a higher rate would have to be negotiated for plots longer than 1189mm.

You can pay cash (take money to the Faculty Finance Office and bring the receipt to IT Support in SEE 9.145), quote a grant number, or pay online at the University of Leeds Store. Plots will not be started until a receipt for payment or grant code is received.

Booking the plotter

Normally we can only plot 4 posters per day. It's possible to book one of these 4 slots at the poster booking site. (Select the Poster Plotting area, then click on the day you want to plot the poster, then click on one of the available poster slots). You can also book by sending a request to foe-support@leeds.ac.uk. Posters which haven't been booked are plotted on a first-come, first-served basis - it's unlikely that we'll be able to plot non-booked posters if all the booking slots are taken on a particular day. We do not stock spare paper or inks for the plotter, so when either of these runs out there will be a delay of a couple of days before new stocks arrive.

At times when there is a student deadline for poster submission, demand for poster plots often exceeds the maximum 4 posters per day which we can plot - so booking is recommended.

Transferring data

Plots can be made direct from any network drive. If you prefer, you can bring a CD or a USB flash disk to the Faculty IT Office in SEE (9.145), where it can be read and returned at once. Or email the file to foe-support@leeds.ac.uk.

Data formats

The plot must be in a format that the software on the Windows research server can load. Currently, that means:

.pdf

.ppt (PowerPoint )

.cdr (CorelDraw version X4 or lower)

CorelDraw can import postscript, eps and various other formats.

.jpg or .jpeg

In several cases CorelDraw files have failed to print, and this has been resolved by using the "Publish to pdf" function, first making sure that the poster has the page size set to the required size.

Checking your work

It pays to check the poster very carefully BEFORE starting to plot. Make sure there are no unusual fonts or symbols used - they will probably be substituted during plotting, which may spoil the appearance or layout of the text. PowerPoint posters using "transparent windows" may fail to print. Always do a test print of your own to an A4 printer.

It is best if you are present at the start of the printing - issues often arise at this stage.

During plotting

Once the plot is sent it takes around 30 minutes to complete. The finished plot can be collected from SEE room 9.145.

 
This site is powered by the TWiki collaboration platform Powered by PerlCopyright 2008-2014 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.